G Grizzly Backflow & Plumbing
Saint Louis, MO · 63101 Local testers · Utility reports filed

Thermal Expansion Tank Tie-In in Saint Louis, MO Near Me

Thermal expansion tank tie-in in Saint Louis, MO after a backflow preventer or check valve closes your water system. Call (833) 990-5874.

Thermal Expansion Tank Tie-In in Saint Louis, MO
Call us
(833) 990-5874
Certified testers
Reports filed with your utility
RPZ, DCVA and PVB
Price talked through by phone

Thermal Expansion Tank Tie-In in Saint Louis, MO

Install a backflow preventer on a home's main line and you have created a closed system. When the water heater runs, heated water expands and has nowhere to go. Pressure climbs until the temperature and pressure relief valve on the heater, set at 150 psi, starts to weep.

A thermal expansion tank fixes that. It is a small steel tank with an air bladder, tied into the cold supply near the heater. The bladder absorbs the expansion.

The detail people skip is the air charge. The tank has to be pre-charged to match your static water pressure, checked with a tire gauge before it goes on. A tank left at the factory 40 psi on a 70 psi system does very little.

Sizing depends on heater capacity and water pressure. A 40 or 50 gallon heater usually takes a 2 gallon tank.

Grizzly Backflow & Plumbing connects Saint Louis, MO homeowners with plumbers who tie in expansion tanks as part of backflow prevention work. Call (833) 990-5874.

How it works

Four steps to backflow testing in Saint Louis, MO

  1. 01

    Grab your notice

    Have the utility letter handy. It lists the device, serial number and due date.

  2. 02

    Talk it through

    Call (833) 990-5874. We go over the device type and the price before anything is booked.

  3. 03

    Test day

    A certified tester reads each check and the relief valve on a calibrated gauge.

  4. 04

    Report filed

    The report goes to your water utility, and you keep a copy for your records.

Coverage

Backflow Testing Services Across Saint Louis, MO

Backflow testing for the neighborhoods and ZIP codes around Saint Louis, MO.

Neighborhoods we cover for backflow testing

  • Downtown
  • Central West End
  • The Hill
  • Soulard
  • Lafayette Square
  • Tower Grove South

ZIP codes we serve

63101 63102 63103 63104 63105 63106 63107 63108 63109 63110 63111 63112 63113 63114 63115 63116 63117 63118 63119 63120 63121 63122 63123 63124 63125 63126 63127 63128 63129 63130 63131 63132 63133 63134 63135 63136 63137 63138 63139 63140 63141 63143 63144 63146 63147 63155

Backflow testing FAQs

Questions about backflow testing

Questions we hear most often about Thermal Expansion Tank Tie-In in Saint Louis, MO.

Talk to a person
Who is allowed to test my backflow device?
A tester who holds a backflow tester certification recognized by your state or your water utility. Many utilities keep an approved tester list and reject reports signed by anyone not on it.
Why is water dripping from my RPZ relief valve?
A steady drip usually means debris is holding the first check open or the relief valve diaphragm is worn. A cleaning or a rebuild kit fixes most cases.
What does a failed backflow test mean?
A check valve or the relief valve did not hold its required pressure differential. The device needs repair or replacement, then a retest before a passing report can be filed.
Can a backflow preventer freeze?
Yes. Trapped water expands and can crack the bronze body or blow out the bonnet. Insulated enclosures, heat cable or draining the device for winter prevent it.
Do I need an expansion tank after installing a backflow preventer?
Often, yes. The device makes your plumbing a closed system, so heated water cannot expand back to the main and the water heater relief valve may start dripping.

Book a backflow test

Backflow Test Due in Saint Louis, MO? Call now.

Certified testers for backflow testing in Saint Louis, MO. Call (833) 990-5874 and we go through the device and the price before anything is booked.

(833) 990-5874
Phone · (833) 990-5874
Call (833) 990-5874 Enquire